Once the condition has been corrected for the zone in question, the status LED will return to blue. The remaining zones will continue to operate and maintain a blue LED status. If the circuitry determines that a channel must be shut down due to excessive heat or low impedance (a short), only the channels that are affected will be turned off causing the zone LED to turn red. These indicators provide quick and easy troubleshooting of the system. The master power switch will turn off the amplifier no matter which power mode has been selected.Įach pair of channels or zones has a bi-color LED to indicate its operational status. When the LED is blue, the amplifier is fully active. The remote turn on switch (located on the rear) is either in the “trigger” or “auto” position. When the switch is on and the indicator LED is red, the amplifier is in standby mode. Power requirements: 115/230 VAC, 50/60 Hz įront panel pushbutton power switch turns the amplifier on and off.Dimensions: 16.7″ W x 4″ H x 14.25″ D (tabletop configuration).
Signal to noise ratio: 115 dB A-weighted.Bridged output: 130 watts RMS into 8 ohms (8 ohm minimum).Rated power output per channel: 65 watts RMS into 8 ohms, 89 watts into 4 ohms.Note: See setup addendum when using in-wall volume controls. Use 14-18 AWG stranded two-conductor loudspeaker wire with Phoenix style connectors. For quick and easy troubleshooting of the system, each pair of channels or zones has a bi-color LED to indicate its operational status. Manual, automatic on/off, or triggered 12V input turn-on modes facilitate easy integration into automated systems. Just relax and let the MA-1260 do the job it was created to do This is helpful when extra power is needed in certain areas or zones. By simply flipping a single switch, two channels can be bridged to increase the total power output for that zone. Each of the twelve channels has its own dedicated input and independent level adjustment to provide further flexibility. Two common or BUS inputs feed audio signals from standard line-level audio sources to any or all channels. The MA1260 can be stacked with other audio components, and includes removable ears for mounting in standard audio racks (2RU).Īll of the input/output options your system could ever need An efficient Class D output stage delivers superior audiophile sound quality and performance. Its intelligently engineered and versatile design integrates easily into high-end whole house audio systems. The Dayton Audio MA1260 freestanding, 12-channel amplifier was created for custom multi-room sound distribution. Installer-friendly setup and connectionsĭayton Audio MA1260 Multi-Zone 12 Channel Amplifier 60WPCĪn efficient, high-density solution to the challenges of distributed audio.Converts easily from rack-mount to tabletop configurations.Independent channel gain controls allow the output of each speaker to be perfectly matched.Bridgeable channel outputs provide additional power when needed.
#Loxone installer software
Creation of the visualisation is completely free of charge.Ī central server is required to implement automation processes and to display a visual representation of the building.įree and licence-free software incl. No additional separate server is required. The intelligence of the system is not managed at a central location but is located directly in the actuators and sensors. The Miniserver is THE central element of Loxone home and building automation and is managed at a central location. KNX, DALI, Modbus RTU/TCP, Schüco, EnOcean, RS485/RS232, DMX and many more).įieldbus, a wide range of manufacturers offer compatible sensors and actuators. Thanks to the numerous interfaces, it is possible to implement a wide range of standards (e.g. Loxone is a manufacturer of software and hardware and thus offers complete solutions in the field of building automation. Thanks to the Loxone KNX Extension, it is also possible to integrate KNX-capable components into a Loxone system and thus implement an app/visualisation as well as many automation and logic functions at a low cost. First of all, both systems are independent solutions for the automation or control of technical facilities in buildings of all kinds.
Specialist companies and customers are often faced with the question of how the Loxone system differs from a KNX system.
0 kommentar(er)
